Diyvehiclerepair
Mahoney State Park in Ashland, Nebraska, USA on 15 October 2016. The successful Pinewood Derby car was provided by Glenn Jewkes of Jewkes Engineering. It completed the run in 1 min 16.7 sec, and weighed 137 g (4.83 oz).
- What is the fastest Pinewood Derby car time?
- What is a good time for Pinewood Derby car?
- What is the fastest wooden car?
- Can a Pinewood Derby car be shorter than 7 inches?
- What is the best weight for Pinewood Derby?
- How do you make a gravity car go faster?
- How long is a soap box derby car?
- Where should the weight be on a Pinewood Derby car?
- Are Bent axles legal in Pinewood Derby?
- How long does Pinewood Derby last?
What is the fastest Pinewood Derby car time?
We used ultralight wheels and grooved axles. It was very fast. Nobody even came close to us. Our best time was 2.516 seconds on a 35 foot aluminum track.
What is a good time for Pinewood Derby car?
Pinewood Derby Results. The average times with just weight added was 3.288 seconds. There was 0.188 seconds between the fastest and slowest car, about 23 inches. The average time was 2.994 seconds, about 44 inches faster than without graphite (0.353 seconds).
What is the fastest wooden car?
In 2016, the "Pioneer Cedar Rocket" set a Guinness World Record for being the fastest motorized log car, reaching a top speed of 47.64 mph on the set of HGTV's Timber Kings at the Wild Horse Pass Motorsports Park in Chandler, Arizona.
Can a Pinewood Derby car be shorter than 7 inches?
Can a pinewood derby car be shorter than 7 inches? Yes, you can make your car shorter but it is not recommended. A shorter car will have a lower center of mass at the start so it will have less energy to convert into speed when going down the track.
What is the best weight for Pinewood Derby?
The more your pine car weighs, the faster it will go on a downhill ramp. Most rules specify a 5 oz. maximum weight. Most Pinewood Derby cars weigh between 1.5 oz and 3.5 oz (depending on design) without weights so a car may need 3.5 oz or more of additional weight.
How do you make a gravity car go faster?
If you want to go fast, the car needs minimal air resistance. As crazy as it sounds, a simple wedge shape car solves this problem. Don't forget to slant the back of the car so it doesn't drag when the car hits the bottom of the hill. Wheels - The wheels provided in the standard kit are excellent.
How long is a soap box derby car?
Cars are typically 4 ft. to 6 ft. long and 2 ft. to 3 ft. wide and generally made of wood. When using wood it is suggested that you use screws rather than nails and be sure to use plenty of wood glue.
Where should the weight be on a Pinewood Derby car?
Best Location to Weight Your Pinewood Derby Car
When deciding on where to weight your car, you should try to reach a final balance point of the car 1 inch or less in front of the rear axle. To achieve this, place 2/5 of the added weight behind the rear axle, and the remaining 3/5 in front of the rear axle.
Are Bent axles legal in Pinewood Derby?
CAN I BEND AXLES AND QUALIFY FOR STOCK CAR OR PRO STOCK DIVISIONS? No. Bent axles are not allowed in either racing class.
How long does Pinewood Derby last?
How long does it take to run the race? From user reports, with the RaceManager each heat should last about two minutes (or less!) per racer. See Running the Race for an explanation.
